How To Remove Roomba Caster Wheel

Great task keeping your Roomba's brushes clean, and if you lot're wiping down its IR sensors and charging contacts, you go bonus points. But accept yous checked your Roomba'southward wheels lately?

If y'all accept a closer expect at your Roomba's pulley wheel (the 1 in forepart), y'all'll probably see plenty of hair wrapped around its axle, while clumps of grit are probably lodged inside the compartments that house the side wheels.

While information technology's easy to ignore a Roomba'due south wheels, you lot should exist checking on them on a regular basis; indeed, iRobot recommends giving them a look every couple of weeks. And if you're noticing herky jerky movement equally your Roomba sweeps your floors, you definitely want to flip your robot over and give its wheels a once-over.

I'one thousand about to describe how to clean the wheels of the Roomba 675Remove non-product link, one of the most popular Roomba models. You lot tin can discover precise directions for your particular model on the iRobot support site, but the following steps volition use to virtually all Roomba robot vacuums.

How to clean a Roomba's front end caster wheel

The first pace is to turn your Roomba over and identify information technology on a flat surface, preferably something soft similar a towel. (Given how dirty your Roomba likely is, you'll probably desire to toss the towel in the wash as soon equally you're done cleaning the Roomba.)

Ben Patterson/IDG

With a little endeavour, you can pull the Roomba's forepart caster wheel right out of its chassis, no tools required.

Next, you need to pull the caster wheel out of the Roomba. You won't need any tools to perform this flim-flam; just get a firm grip on the wheel and pull information technology straight out. With a little try, the caster should come free, consummate with its stem.

Related: How to clean a Roomba's sensors and charging contacts

More than likely than not, at that place will exist a substantial amount of hair wrapped around the axle. Rather than trying to yank information technology free, simply remote the wheel from its housing; once that's washed, you can easily remove the ring of hair from around the beam.

Ben Patterson/IDG

Yep, that's a neat trivial ring of hair that was wrapped effectually the caster wheel's axle.

Using a soft cloth, wipe down the wheel itself; you don't have to go crazy, simply clean off whatsoever obvious dust or droppings. While you're at it, you should also wipe downwards the bike compartment.

Also, don't forget the top of the wheel housing, where the stem is; that's a favorite hiding spot for grit and dirt.

Ben Patterson/IDG

Don't miss the top of the pulley housing; you'll probably find some dust hiding in that location.

All washed? Snap the wheel dorsum into its housing, and then button the caster back into the bicycle compartment; keep pushing until the stem clicks dorsum into place.

How to clean a Roomba's side wheels

You tin't remove a Roomba'south side wheels as easily equally you can its front end caster wheel—in fact, we're not even going to try. Instead, we're going to make clean out whatsoever stubborn clumps of dust or hair while keeping the side wheels in place.

Related: How to clean a Roomba'due south brushes

Start, push downwards on one of the side wheels; information technology should sink right into the Roomba's chassis, so spring back into identify one time you release it. Push the bicycle back in, and so take a peek. Run into any clumps of debris? Go ahead and pull them out. Pushing the wheels in and out repeatedly tin help release whatever dust, dirt or pilus.

Ben Patterson/IDG

Pushing down on the Roomba'southward side bicycle will probably reveal clumps of debris that you can pull out.

If you're having a hard time cleaning the junk out of the Roomba's side bicycle compartments, try spraying them with a can of compressed air.

Replacing a Roomba's caster wheel

The caster cycle on your Roomba isn't designed to terminal forever. iRobot recommends replacing it once a year. Luckily (and as we just saw), removing a Rooomba's caster wheel isn't difficult, and yous tin snap upward a replacement on AmazonRemove non-product link for almost $9.

Cleaning the rest of your Roomba

Want to get your Roomba completely clean? There are plenty of places where dust, pilus, and grime love to hide in your Roomba, only these tips and how-tos can help bust all the dust.

• How to clean your Roomba's charing contacts and cliff sensors
• How to clean your Roomba'southward dust filter properly
• How to clean your Roomba's brushes

Thinking of buying your start robot vacuum? Read this commodity first

Source: https://www.techhive.com/article/579242/how-to-clean-roomba-wheels.html

Share this post